ARO 2" stainless steel EVO Series™ pump offers maximum energy efficiency in wastewater metering application
Reach out to us
Electric Diaphragm Pump Case Study for Wastewater Treatment Dewatering
The EVO Series™ Electric Diaphragm Pump was placed in a manufacturing facility producing chemicals and other equipment for the commercial cleaning industry.
Products being manufactured at the facility include: dish washing detergent, hand cleaners, sanitizers, disinfectants, floor cleaners, strippers, finishers, sealers for stone, tile, and grout, degreasers, glass cleaners, laundry detergents and other chemicals and equipment.
The Application
The large commercial cleaning product manufacturer required the following features in their wastewater discharge pump:
The ability to maintain consistent flow rates at varying head pressures
Constant operation at multiple speeds
Precise metering of wastewater into the municipal sewer system
The ability to quickly increase flow to discharge a large volume of wastewater based on system requirements
The EVO Series™ Electric Diaphragm Pump
was installed to push a precise amount of wastewater through a filtration system with varying pressures. The pump discharges the exact amount of treated wastewater based on the allowable flow rate dictated by the municipality. The pump provides “sprint” capability to discharge large amounts of wastewater if it is required by the treatment process.
Operating Conditions
Running Hours: 1,600
Average Speed: 40 pump rpm/4.2 rad/s (17 Hz)
Average Torque: 10% achieving average, 26% max peak
Current Flow: average 3.6 amps, achieving max 5.4 amps
Average Pressure: 16.9 psi (1.1 bar)
Average Flow Rate: 30 gpm (113.6 l/min)
The Results
Specifications of the pump installed:
2” EVO Series™ Electric Diaphragm Pump with Stainless Steel pump head , PTFE Diaphragm and Balls
The customer highlighted the following benefits noted after four months of operation:
Low pulsation results in significant output efficiency
Ability to perform consistently at different speeds to be able to maximize the customer’s output requirements
Significant noise reduction
Pump has not required any maintenance, thus reducing costs and resources
The EVO Series™ Electric Diaphragm Pump saved the customer money by maximizing energy efficiency and minimizing maintenance costs.
Technical Data Specifications
- Inlet Configuration: 2” hose, 6 ft (1,8 m) vertical, 30 ft (9,1 m) hose
- Outlet Configuration: 2” hose, 30 ft (9,1 m) with part of piping flooded into a filtration unit at ground level
- Flow: 30 gpm (113.6 l/min) during the day; 6.8 gpm (25.7 l/min) in the evening
- Duty Cycle: continuous duty
The duty cycle rate has been 60%, assuming VFD is powered, meaning average working hours are between 14-16 hours.
Technical Observations
- Easy to install: Easy and fast to set up the pump due to the Smart ARO® Setup (SAS) software
- Smooth operation under low or high load conditions
- Significant noise reduction while operating
- Good conservation of wear components (balls, seats and diaphragms); diaphragm life increased significantly
- Since installation no mechanical or electrical issues have been presented and there have been no wear component failures
- Easy and fast daily start up with no additional modifications necessary throughout the day
Customer’s Testimonial
“This pump is quiet! We do not even notice its running except for the occasional check ball shaking. So much quieter than the positive displacement pump installed previously.”
“The pump runs great — we have over 1,500 hours of runtime and have not had to touch it yet.”
“I am excited to calculate the energy savings compared to our previously installed positive displacement pumps.”
“One thing we noticed is that our wastewater output went down significantly due to the low pulsation compared to the previous pump. The higher pulsation caused higher readings on the meter and we are restricted in the amount of wastewater we can discharge. The minimal pulsation of the EVO Series pump saved us a lot of money!”
The EVO Series™ Electric Diaphragm Pump offers an exclusive set of proven technologies packaged into one breakthrough pump.
- Top pump efficiency
- Low pulsation
- One of the best solution for dosing applications
- High efficiency for companies that use activated carbon in WWT applications
- Suspended solids capability
